 |
[Home] [Safety Rating] [Customer Reviews] [Ordering Info]
|
|
|
Ordering Info |
|
Each EZEE Step Boat Trailer Step is custom designed and manufactured to your boat and trailer combination, this will insure that you receive the absolute prefect step for your needs. |
|
|
For more information or to order your EZEE Step. |
|
|
Please Call 815-447-2771 |
|
|
All inquiries will be responded to with in 48 hours. |
|
|
You may also send email to ezeestep@yahoo.com |
| Step 1: Frame Measurement | ||
| Measure the frame for height and depth. *Note If one step is being mounted on the tongue instead of the frame make sure the tongue height and depth is the same. |  |
 |
| Step 2: Boat to Frame Measurement | ||
| 1) Measure approximately 5-7 inches back from your trolling motor. |  |
|
| 2) From this location place a 4 ft. level or long board with a small level against the outer edge of the boat. 3) Holding the level vertical measure the distance between the frame and the level this will be boat to frame measurement #1. |
 |
|
| 4) Measure 15” back on your trailer frame from where you took measurement #1. |  |
|
| 5) Holding the level vertical measure the distance between the frame at the spot you jsut found in #4 and the level. This will be boat to frame measurement #2. |  |
|
| Step 3: Boat Height Measurement | ||
| Measure the distance from between the top of your trailer frame and the top edge of your boat - this will give me the height to uniformly measure your steps. | ||
